Configuration
Before you begin
A key step before you start measuring is whether you would like your blinds inside the window frames (known as recess fit) or outside (known as face fit). Recess fit needs a minimum 50mm depth, 70mm is recommended.
Under Roll
- Less light leakage & more privacy
- Blind roll and backing is visible
- Recommended for face fit
Over Roll
- Clears obstructions
- Covers tubing
Measure - Face fit
Measuring the width:
Measure the exact outside width of architrave in three different positions- the top, middle and bottom.
Take the largest measurement.
If window has no architraves add 50mm each side
Note:
If window has no architraves add 50mm each side
Measuring the drop:
Measure the exact outside height of architrave in
three different positions- the left, middle and right.
Take the largest measurement.
Note:
If window has no architraves add 80mm
Measure - Recess fit
Measuring the depth:
Before selecting recess fit, make
sure you have a minimum of
50mm in depth.
Note:
However, 70mm is recommended.
Measuring the width:
Measure the exact inside width in three different positions – the top, middle & bottom (do not make deductions).
Note:
Take the smallest measurement.
Measuring the drop:
Measure the exact inside recess
height from the top to the bottom
of the windowsill in three positions
– the left, middle, & right.
Note:
Take the smallest measurement.
