Configuration
Before you begin
A key step before you start measuring is whether you would like your blinds inside the window frames (known as recess fit) or outside (known as face fit).
Measure - Face fit
Measuring the width:
Measure the exact outside width of architrave in three different positions – the top, middle and
bottom.
Note:
Take the largest measurement.
Measuring the drop:
Measure from the top of the architrave to where you would like the blind to finish in three different positions – the left, middle and right.
Note:
Take the largest measurement.
For windows that finish on the floor, we recommend finishing the blind 8mm above the floor.
Measure - Recess fit
There is a minimum depth requirement for venetian blinds
- 75mm of depth in window for 65mm Tuscany
- 65mm of depth in window for 50mm Tuscany and Aluminium
- 30mm of depth in window for 25mm Aluminium
Measuring the depth:
Before selecting recess fit, make
sure you have the minimum depths for your blind type.
Note:
Take the smallest measurement
Measuring the drop:
Measure the exact inside recess
height from the top to the bottom
of the windowsill in three positions – the left, middle, & right.
Note:
Take the smallest measurement
Measuring the depth:
Before selecting recess fit, make
sure you have the minimum depths for your blind type.
Note:
Take the smallest measurement
